| № | Наименование | Примечание | Кол-во |
|---|---|---|---|
| 1 | GEAR SEC DRIVE BEVEL (NT:17) | 1 | |
| 2-1 | SHIM SETSEC DR (MODEL K3/K4/K5T:0.25/0.30/0.35/0.90/1.00/1.05/1.10/1.15) | 1 | |
| 3 | NUT 20MM | 1 | |
| 4 | WASHER | 1 | |
| 5 | GEAR SEC DRIVEN BEVEL (NT:21 | 1 | |
| 6 | WASHER | 1 | |
| 7 | SHAFTSEC DRIVE | 1 | |
| 8 | YOKE REAR DRIVE OUTPUT | 1 | |
| 9 | .PLATE OUTPUT | 1 | |
| 10 | SHAFTPROPELLER | 1 | |
| 11-1 | YOKEPROP SHAFT | 1 | |
| 12 | .JOINT SET | 1 | |
| 12A | JOINT SETUNIVE | 1 | |
| 13 | ..CIRCLIP | 4 | |
| 14 | NUT | 1 | |
| 15 | NUT | 1 | |
| 16 | WASHER SEC DRIV | 1 | |
| 17-1 | SHIMSEC DRIVEN | 1 | |
| 17-10 | SHIM | 1 | |
| 17-11 | SHIM | 1 | |
| 17-12 | SHIM | 1 | |
| 17-13 | SHIM | 1 | |
| 17-2 | SHIMSEC DRIVEN | 1 | |
| 17-3 | SHIM 0.7 | 1 | |
| 17-4 | SHIM | 1 | |
| 17-5 | SHIM 0.8 | 1 | |
| 17-6 | SHIM | 1 | |
| 17-7 | SHIM 0.9 | 1 | |
| 17-8 | SHIM | 1 | |
| 17-9 | WASHER5TH DRIV | 1 | |
| 17A | SHIM SEC DRIVEN (T:0.55/0.58/0.60/0.63/0.65/0.68 /0.70/0.73/0.75/0.78/0.80/0.83 /0.85/0.88/0.90/0.93/0.95/0.98 /1.00/1.03/1.05/1.08/1.10/1.13 /1.15/1.18/1.20/1.23/1.25/1.28 /1.30/1.33/1.35/1.38/1.40) | 1 | |
| 18 | BEARING (30X50X17) | 1 | |
| 19 | BEARING (25X52X20.6) | 1 | |
| 20 | OIL SEAL (34X52X9) | 1 | |
| 21 | C RING | 1 | |
| 22 | BOLT | 3 |